update confugration examples and README (#3650)

conf/legacy/frpc_legacy_full.ini

@@ -0,0 +1,389 @@
+# [common] is integral section
+[common]
+# A literal address or host name for IPv6 must be enclosed
+# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
+# For single "server_addr" field, no need square brackets, like "server_addr = ::".
+server_addr = 0.0.0.0
+server_port = 7000
+
+# STUN server to help penetrate NAT hole.
+# nat_hole_stun_server = stun.easyvoip.com:3478
+
+# The maximum amount of time a dial to server will wait for a connect to complete. Default value is 10 seconds.
+# dial_server_timeout = 10
+
+# dial_server_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
+# If negative, keep-alive probes are disabled.
+# dial_server_keepalive = 7200
+
+# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set http_proxy here or in global environment variables
+# it only works when protocol is tcp
+# http_proxy = http://user:passwd@192.168.1.128:8080
+# http_proxy = socks5://user:passwd@192.168.1.128:1080
+# http_proxy = ntlm://user:passwd@192.168.1.128:2080
+
+# console or real logFile path like ./frpc.log
+log_file = ./frpc.log
+
+# trace, debug, info, warn, error
+log_level = info
+
+log_max_days = 3
+
+# disable log colors when log_file is console, default is false
+disable_log_color = false
+
+# for authentication, should be same as your frps.ini
+# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
+authenticate_heartbeats = false
+
+# authenticate_new_work_conns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
+authenticate_new_work_conns = false
+
+# auth token
+token = 12345678
+
+authentication_method = 
+
+# oidc_client_id specifies the client ID to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
+# By default, this value is "".
+oidc_client_id =
+
+# oidc_client_secret specifies the client secret to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
+# By default, this value is "".
+oidc_client_secret =
+
+# oidc_audience specifies the audience of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
+oidc_audience =
+
+# oidc_scope specifies the permisssions of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
+oidc_scope =
+
+# oidc_token_endpoint_url specifies the URL which implements OIDC Token Endpoint.
+# It will be used to get an OIDC token if AuthenticationMethod == "oidc". By default, this value is "".
+oidc_token_endpoint_url =
+
+# oidc_additional_xxx specifies additional parameters to be sent to the OIDC Token Endpoint.
+# For example, if you want to specify the "audience" parameter, you can set as follow.
+# frp will add "audience=<value>" "var1=<value>" to the additional parameters.
+# oidc_additional_audience = https://dev.auth.com/api/v2/
+# oidc_additional_var1 = foobar
+
+# set admin address for control frpc's action by http api such as reload
+admin_addr = 127.0.0.1
+admin_port = 7400
+admin_user = admin
+admin_pwd = admin
+# Admin assets directory. By default, these assets are bundled with frpc.
+# assets_dir = ./static
+
+# connections will be established in advance, default value is zero
+pool_count = 5
+
+# if tcp stream multiplexing is used, default is true, it must be same with frps
+# tcp_mux = true
+
+# specify keep alive interval for tcp mux.
+# only valid if tcp_mux is true.
+# tcp_mux_keepalive_interval = 60
+
+# your proxy name will be changed to {user}.{proxy}
+user = your_name
+
+# decide if exit program when first login failed, otherwise continuous relogin to frps
+# default is true
+login_fail_exit = true
+
+# communication protocol used to connect to server
+# supports tcp, kcp, quic, websocket and wss now, default is tcp
+protocol = tcp
+
+# set client binding ip when connect server, default is empty.
+# only when protocol = tcp or websocket, the value will be used.
+connect_server_local_ip = 0.0.0.0
+
+# quic protocol options
+# quic_keepalive_period = 10
+# quic_max_idle_timeout = 30
+# quic_max_incoming_streams = 100000
+
+# If tls_enable is true, frpc will connect frps by tls.
+# Since v0.50.0, the default value has been changed to true, and tls is enabled by default.
+tls_enable = true
+
+# tls_cert_file = client.crt
+# tls_key_file = client.key
+# tls_trusted_ca_file = ca.crt
+# tls_server_name = example.com
+
+# specify a dns server, so frpc will use this instead of default one
+# dns_server = 8.8.8.8
+
+# proxy names you want to start separated by ','
+# default is empty, means all proxies
+# start = ssh,dns
+
+# heartbeat configure, it's not recommended to modify the default value
+# The default value of heartbeat_interval is 10 and heartbeat_timeout is 90. Set negative value
+# to disable it.
+# heartbeat_interval = 30
+# heartbeat_timeout = 90
+
+# additional meta info for client
+meta_var1 = 123
+meta_var2 = 234
+
+# specify udp packet size, unit is byte. If not set, the default value is 1500.
+# This parameter should be same between client and server.
+# It affects the udp and sudp proxy.
+udp_packet_size = 1500
+
+# include other config files for proxies.
+# includes = ./confd/*.ini
+
+# If the disable_custom_tls_first_byte is set to false, frpc will establish a connection with frps using the
+# first custom byte when tls is enabled.
+# Since v0.50.0, the default value has been changed to true, and the first custom byte is disabled by default.
+disable_custom_tls_first_byte = true
+
+# Enable golang pprof handlers in admin listener.
+# Admin port must be set first.
+pprof_enable = false
+
+# 'ssh' is the unique proxy name
+# if user in [common] section is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
+[ssh]
+# tcp | udp | http | https | stcp | xtcp, default is tcp
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+# limit bandwidth for this proxy, unit is KB and MB
+bandwidth_limit = 1MB
+# where to limit bandwidth, can be 'client' or 'server', default is 'client'
+bandwidth_limit_mode = client
+# true or false, if true, messages between frps and frpc will be encrypted, default is false
+use_encryption = false
+# if true, message will be compressed
+use_compression = false
+# remote port listen by frps
+remote_port = 6001
+# frps will load balancing connections for proxies in same group
+group = test_group
+# group should have same group key
+group_key = 123456
+# enable health check for the backend service, it support 'tcp' and 'http' now
+# frpc will connect local service's port to detect it's healthy status
+health_check_type = tcp
+# health check connection timeout
+health_check_timeout_s = 3
+# if continuous failed in 3 times, the proxy will be removed from frps
+health_check_max_failed = 3
+# every 10 seconds will do a health check
+health_check_interval_s = 10
+# additional meta info for each proxy
+meta_var1 = 123
+meta_var2 = 234
+
+[ssh_random]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+# if remote_port is 0, frps will assign a random port for you
+remote_port = 0
+
+# if you want to expose multiple ports, add 'range:' prefix to the section name
+# frpc will generate multiple proxies such as 'tcp_port_6010', 'tcp_port_6011' and so on.
+[range:tcp_port]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 6010-6020,6022,6024-6028
+remote_port = 6010-6020,6022,6024-6028
+use_encryption = false
+use_compression = false
+
+[dns]
+type = udp
+local_ip = 114.114.114.114
+local_port = 53
+remote_port = 6002
+use_encryption = false
+use_compression = false
+
+[range:udp_port]
+type = udp
+local_ip = 127.0.0.1
+local_port = 6010-6020
+remote_port = 6010-6020
+use_encryption = false
+use_compression = false
+
+# Resolve your domain names to [server_addr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
+[web01]
+type = http
+local_ip = 127.0.0.1
+local_port = 80
+use_encryption = false
+use_compression = true
+# http username and password are safety certification for http protocol
+# if not set, you can access this custom_domains without certification
+http_user = admin
+http_pwd = admin
+# if domain for frps is frps.com, then you can access [web01] proxy by URL http://web01.frps.com
+subdomain = web01
+custom_domains = web01.yourdomain.com
+# locations is only available for http type
+locations = /,/pic
+# route requests to this service if http basic auto user is abc
+# route_by_http_user = abc
+host_header_rewrite = example.com
+# params with prefix "header_" will be used to update http request headers
+header_X-From-Where = frp
+health_check_type = http
+# frpc will send a GET http request '/status' to local http service
+# http service is alive when it return 2xx http response code
+health_check_url = /status
+health_check_interval_s = 10
+health_check_max_failed = 3
+health_check_timeout_s = 3
+
+[web02]
+type = https
+local_ip = 127.0.0.1
+local_port = 8000
+use_encryption = false
+use_compression = false
+subdomain = web02
+custom_domains = web02.yourdomain.com
+# if not empty, frpc will use proxy protocol to transfer connection info to your local service
+# v1 or v2 or empty
+proxy_protocol_version = v2
+
+[plugin_unix_domain_socket]
+type = tcp
+remote_port = 6003
+# if plugin is defined, local_ip and local_port is useless
+# plugin will handle connections got from frps
+plugin = unix_domain_socket
+# params with prefix "plugin_" that plugin needed
+plugin_unix_path = /var/run/docker.sock
+
+[plugin_http_proxy]
+type = tcp
+remote_port = 6004
+plugin = http_proxy
+plugin_http_user = abc
+plugin_http_passwd = abc
+
+[plugin_socks5]
+type = tcp
+remote_port = 6005
+plugin = socks5
+plugin_user = abc
+plugin_passwd = abc
+
+[plugin_static_file]
+type = tcp
+remote_port = 6006
+plugin = static_file
+plugin_local_path = /var/www/blog
+plugin_strip_prefix = static
+plugin_http_user = abc
+plugin_http_passwd = abc
+
+[plugin_https2http]
+type = https
+custom_domains = test.yourdomain.com
+plugin = https2http
+plugin_local_addr = 127.0.0.1:80
+plugin_crt_path = ./server.crt
+plugin_key_path = ./server.key
+plugin_host_header_rewrite = 127.0.0.1
+plugin_header_X-From-Where = frp
+
+[plugin_https2https]
+type = https
+custom_domains = test.yourdomain.com
+plugin = https2https
+plugin_local_addr = 127.0.0.1:443
+plugin_crt_path = ./server.crt
+plugin_key_path = ./server.key
+plugin_host_header_rewrite = 127.0.0.1
+plugin_header_X-From-Where = frp
+
+[plugin_http2https]
+type = http
+custom_domains = test.yourdomain.com
+plugin = http2https
+plugin_local_addr = 127.0.0.1:443
+plugin_host_header_rewrite = 127.0.0.1
+plugin_header_X-From-Where = frp
+
+[secret_tcp]
+# If the type is secret tcp, remote_port is useless
+# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
+type = stcp
+# sk used for authentication for visitors
+sk = abcdefg
+local_ip = 127.0.0.1
+local_port = 22
+use_encryption = false
+use_compression = false
+# If not empty, only visitors from specified users can connect.
+# Otherwise, visitors from same user can connect. '*' means allow all users.
+allow_users = *
+
+# user of frpc should be same in both stcp server and stcp visitor
+[secret_tcp_visitor]
+# frpc role visitor -> frps -> frpc role server
+role = visitor
+type = stcp
+# the server name you want to visitor
+server_name = secret_tcp
+sk = abcdefg
+# connect this address to visitor stcp server
+bind_addr = 127.0.0.1
+# bind_port can be less than 0, it means don't bind to the port and only receive connections redirected from
+# other visitors. (This is not supported for SUDP now)
+bind_port = 9000
+use_encryption = false
+use_compression = false
+
+[p2p_tcp]
+type = xtcp
+sk = abcdefg
+local_ip = 127.0.0.1
+local_port = 22
+use_encryption = false
+use_compression = false
+# If not empty, only visitors from specified users can connect.
+# Otherwise, visitors from same user can connect. '*' means allow all users.
+allow_users = user1, user2
+
+[p2p_tcp_visitor]
+role = visitor
+type = xtcp
+# if the server user is not set, it defaults to the current user
+server_user = user1
+server_name = p2p_tcp
+sk = abcdefg
+bind_addr = 127.0.0.1
+# bind_port can be less than 0, it means don't bind to the port and only receive connections redirected from
+# other visitors. (This is not supported for SUDP now)
+bind_port = 9001
+use_encryption = false
+use_compression = false
+# when automatic tunnel persistence is required, set it to true
+keep_tunnel_open = false
+# effective when keep_tunnel_open is set to true, the number of attempts to punch through per hour
+max_retries_an_hour = 8
+min_retry_interval = 90
+# fallback_to = stcp_visitor
+# fallback_timeout_ms = 500
+
+[tcpmuxhttpconnect]
+type = tcpmux
+multiplexer = httpconnect
+local_ip = 127.0.0.1
+local_port = 10701
+custom_domains = tunnel1
+# route_by_http_user = user1